1998 Nissan Altima Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Nissan Altima Alarm Information )
| 1998 Nissan Altima Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White/Red |
Ignition Switch Harness |
| Starter |
Black/Yellow |
Cold Start Wire is Blue/Black in Ignition Switch Harness |
| Ignition |
Black/Red (+) |
Ignition Switch Harness |
| Ignition 2 |
Starter 2 Wire |
Black/Blue or Black/White |
| Accessory |
Black/Pink |
Ignition Switch Harness |
| Tach |
Green |
Or Blue At Coil or Position 3 Yellow or Red ECM |
| Neutral Safety Wire |
Gray/Red |
Pin 19 at ECM |
| Brake Switch |
Red/Green |
Brake Switch |
| Trunk Pin |
Red/Gray |
Driver's Side Wire Loom from LATCH |
| Parking Lights |
Red/Blue |
Ignition Switch Harness |
| Head Lamp |
Red/Yellow (L) |
Light Blue (R) at Switch |
| Factory Disarm |
Green/Yellow |
Module on right of Column (Green/Red Arm) |
| Door Trigger |
Red/Black (-) |
SMART Control Module Unit |
| Door Lock |
Gray (-) |
Right Side of Steering Column SCM |
| Door Unlock |
Purple (-) |
3 Wire Negative |
| Horn Wire |
Green/Yellow |
6Pin White Connector POS 3 |
| Windows Up |
LF=Green, RF=Red/White, LR=Yellow/Red, RR=Green/White |
| Windows Down |
LF=Blue, RF=Red/Black, LR=Yellow/Black, RR=Green/Black |
|
|
Follow the12volt.com
Monday, May 6, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
