
2000 Nissan Altima Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Nissan Altima Alarm Information )
2000 Nissan Altima Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | White/Red |
Ignition Switch Harness |
Starter |
Black/Yellow |
Cold Start Wire is Blue/Black in Ignition Switch Harness |
Ignition |
Black/Red (+) |
Ignition Switch Harness |
Ignition 2 |
Black/Pink |
Ignition Switch Harness |
Accessory |
White/Blue |
Ignition Switch Harness |
Tach |
Blue/Orange |
Power Control Module |
Neutral Safety Wire |
Green/Orange |
|
Brake Switch |
Red/Green |
Brake Switch |
Trunk Release |
Orange/Black (-) |
Right of Steering Column |
Trunk Pin |
Red |
Light in Trunk |
Parking Lights |
Red/Blue |
Ignition Switch Harness |
Head Lamp |
Red/Yellow (L) |
Light Blue (R) at Switch |
Factory Disarm |
Green/Yellow |
Module on right of Column |
Door Trigger |
Red/White (-) |
Driver's Kick Panel |
Door Lock |
Gray (-) |
Right Side of Steering Column SCM |
Door Unlock |
Purple (-) |
3 Wire Negative |
Driver's Lock |
DR. Yellow |
DR. at Door Motor Passenger's White/Red at Motor |
Driver's Unlock |
Red/Blue DR. |
Door Motor Passenger's Red/Blue at Motor |
Horn Wire |
Red (-) |
Horn |
Windows Up |
LF=Green, RF=Red/White, LR=Yellow/Red, RR=Green/White |
Windows Down |
LF=Blue, RF=Red/Black, LR=Yellow/Black, RR=Green/Black |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.