
1992 Nissan Maxima Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1992 Nissan Maxima Alarm Information )
1992 Nissan Maxima Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | White/Red or White |
Ignition Switch Harness |
Starter |
Black/Yellow or White/Blue |
Ignition Switch Harness |
Ignition |
Black/White or White/Green |
Ignition Switch Harness |
Ignition 2 |
Green/White |
Green/Red (cold start Wire) |
Accessory |
White or White/Red |
Ignition Switch Harness |
Tach |
Blue Green/Black |
ECU Driver's Side of Center Console |
Brake Switch |
Red/White |
Brake Switch |
Trunk Release |
Brown (+) |
Driver's Kick Panel |
Trunk Pin |
Pink/Black (-) |
Anti-Theft Module left of Steering Column |
Parking Lights |
Red/Yellow (+) |
Harness by Steering Column |
Head Lamp |
Red/Yellow |
Red/Blue Harness by Steering Column |
Hood Pin |
Gray/Black (-) |
Anti-Theft Module left of Steering Column |
Factory Disarm |
Green/Black (-) |
Anti-Theft Module left of Steering Column |
Door Trigger |
Orange/Black (-) |
Anti-Theft Module left of Steering Column |
Door Lock |
Gray/Red (-) |
Door Lock Timer right of Steering Column |
Door Unlock |
Light Blue (-) |
|
Horn Wire |
Brown/White (-) |
Steering Column |
Windows Up |
LF=Blue/RedData Link Switch, Must go to each Switch in each Door |
Windows Down |
LF=Blue/Black |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.