1997 Nissan Quest Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Nissan Vehicles / 1997 Nissan Quest

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Nissan Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1997 Nissan Quest Alarm Information )

1997 Nissan Quest Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White/Purple	Ignition Switch Harness
Starter	Black/Yellow	Cold Start Wire is Red/Green in Ignition Switch Harness
Ignition	Black/White	Ignition Switch Harness
Ignition 2	Red/Green	or Blue Ignition Switch (Heat/AC)
Accessory	White/Green	Ignition Switch Harness
Tach	Green/White (AC)	Ignition Module or PCM
Brake Switch	Yellow/Black	Brake Switch
Trunk Pin	Light Brown/White (-)	Driver's Kick use Diode to Isolate
Parking Lights	Pink/Blue (+)	Fuse Panel behind Driver's Dash
Head Lamp	Gray/Red	Light Switch
Factory Disarm	Red/Black (-)	Driver's Kick Panel 16 Pin Connector
Door Trigger	Red/White (-)	Driver's Kick or Dash INDICATOR (Diode Isolate)
Door Lock	Green/White (-)	Driver's Kick Panel or Center Console
Door Unlock	Green/Orange (-)
Horn Wire	Yellow (-)	Steering Column
Windows Up	LF=Purple, RF=Green/Black, LR=Red/White, RR=Red
Windows Down	LF=Blue/Red, RF=Orange/Blue, LR=Red/Black, RR=Red/Blue

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.