
2000 Nissan Quest Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Nissan Quest Alarm Information )
2000 Nissan Quest Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | White/Purple |
Ignition Switch Harness |
Starter |
Red |
Cold Start Wire is White/Blue in Ignition Switch Harness |
Ignition |
Brown |
Ignition Switch Harness |
Ignition 2 |
Red/Green |
or Blue Ignition Switch (Heat/AC) |
Accessory |
White/Green |
Ignition Switch Harness |
Tach |
White |
ECM behind Glove Compartment |
Neutral Safety Wire |
Orange/Blue (+) |
|
Brake Switch |
Yellow/Black |
Brake Switch |
Trunk Pin |
Red/White (-) |
Right of Steering Column |
Parking Lights |
Pink/Blue (+) |
Fuse Panel behind Driver's Dash |
Head Lamp |
Gray/Red |
Light Switch |
Factory Disarm |
Red/Black (-) |
Driver's Kick Panel 16 Pin Connector |
Door Trigger |
Red/White (-) |
Driver's Kick or Dash INDICATOR (Diode Isolate) |
Door Lock |
Green/White (-) |
Driver's Kick Panel or Center Console |
Door Unlock |
Green/Orange (-) |
|
Driver's Lock |
Green/Yellow |
Each Motor or Driver's Motor |
Driver's Unlock |
Red/Yellow |
Driver's Motor |
Passenger Unlock |
White/Red |
Passenger's Side Motor |
Horn Wire |
Black (-) |
Horn Switch |
Windows Up |
LF=Purple, RF=Green/Black, LR=Red/White, RR=Red |
Windows Down |
LF=Blue/Red, RF=Orange/Blue, LR=Red/Black, RR=Red/Blue |
|
|
Follow the12volt.com
Wednesday, May 21, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.