2000 Acura CL Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Acura CL Alarm Information )
| 2000 Acura CL Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White |
Ignition Switch Harness |
| Starter |
Black/White |
Ignition Switch Harness |
| Ignition |
Black/Yellow |
Ignition Switch Harness |
| Ignition 2 |
White/Black |
Ignition Switch Harness |
| Accessory |
Yellow |
Ignition Switch Harness |
| Tach |
Blue |
Distributor |
| Neutral Safety Wire |
Green/White |
Gear Select Switch |
| Brake Switch |
Green/White |
Brake Switch |
| Trunk Release |
Blue/Red (+) |
Factory Alarm under Passenger's Seat |
| Trunk Pin |
Light Green/Black |
Under Passenger's Seat or Orange Wire at Trunk Light |
| Parking Lights |
Red/Black (+) |
Left of Column or at Security Module |
| Head Lamp |
Red/Yellow (+) |
Brown Connector Driver's Kick |
| Factory Disarm |
Blue (-) |
Factory Alarm under Passenger's Seat |
| Door Trigger |
Black/White (-) |
Factory Alarm under Passenger's Seat |
| Door Lock |
Red/Yellow (-) |
Factory Alarm under Passenger's Seat |
| Door Unlock |
Red/Blue (-) |
|
| Driver's Lock |
White/Red |
Gray Connector Driver's Door |
| Driver's Unlock |
Yellow/Red |
Gray Connector Passenger's Door |
| Horn Wire |
Light Green/Blue (-) |
Blue Connector behind Driver's Dash |
|
|
Follow the12volt.com
Wednesday, May 21, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
