1997 Oldsmobile Cutlass Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1997 Oldsmobile Cutlass Alarm Information )
1997 Oldsmobile Cutlass Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Red |
Ignition Switch Harness (remove radio) |
Starter |
Yellow |
Ignition Switch Harness |
Ignition |
Pink |
Ignition Switch Harness |
Ignition 2 |
Green |
Ignition Switch Harness (PCM and BCM) |
Ignition 3 |
Brown |
Ignition Switch Harness |
Accessory |
Orange |
Ignition Switch Harness (Heat/AC) |
Tach |
White |
Ignition Coil |
Neutral Safety Wire |
Yellow (-) |
Left Side Electrical Center |
Brake Switch |
Light Blue |
Brake Switch |
Trunk Release |
Black/White |
Blue/Black Connector Driver's Kick Panel near Door STEP |
Trunk Pin |
Orange/Black (-) |
Light in Trunk |
Parking Lights |
Brown (-) |
Gray Boot at Firewall or Head Light Switch |
Head Lamp |
Dark Blue (-) |
Light Switch |
Door Trigger |
Light Green/Black L |
Driver's Kick, Light Blue (-) R Driver's Kick Isolate |
Door Lock |
Light Blue (+) |
Driver's Kick Panel Positive Trigger |
Door Unlock |
White (+) |
Passenger's Switch is Master Switch |
Horn Wire |
Black (-) |
Trunk Switch |
Windows Up |
LF=Dark Blue, RF=Light Blue, LR=Dark Green, RR=Light Green |
Windows Down |
LF=Green, RF=Tan, LR=Purple, RR=Purple |
|
|
Follow the12volt.com
Friday, September 20, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.