1998 Plymouth Voyager Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Plymouth Voyager Alarm Information )
1998 Plymouth Voyager Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Red or Pink/Black |
Ignition Switch Harness |
Starter |
Yellow |
Ignition Switch Harness |
Ignition |
Dark Blue |
Ignition Switch Harness |
Ignition 2 |
Black/White |
Ignition Switch Harness |
Ignition 3 |
Dark Green/Red |
Ignition Switch Harness |
Accessory |
Black/Orange |
Ignition Switch Harness |
Tach |
Gray |
Or Blue/Tan PCM Coil 2.4 Liter Engine |
Neutral Safety Wire |
Black/White |
Power Control Module |
Brake Switch |
White/Light Brown |
Brake Switch |
Trunk Pin |
Tan/Black |
40 Pin Connector at Fuse Panel |
Parking Lights |
Light Green/White (-) |
Head Light Switch Harness left of Column |
Head Lamp |
Green/Orange |
Light Switch |
Factory Disarm |
White/Dark Green |
(665 Ohm) left Connector bottom of Fuse Panel |
Door Trigger |
Brown/White (-) |
Lower right Gray Connector at Fuse Panel |
Door Lock |
White/Dark Green |
BCM at Fuse Panel |
Door Unlock |
White/Dark Green |
White Connector B58 Connector |
Horn Wire |
Black/Red |
Steering Column |
Windows Up |
LF=Light Green, RF=Brown/White, LR=Blue, RR=Gray |
Windows Down |
LF=White, RF=Purple/White, LR=Red/White, RR=Dark Green |
|
|
Follow the12volt.com
Monday, October 7, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.