2000 Plymouth Voyager Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Plymouth Vehicles / 2000 Plymouth Voyager

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Plymouth Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Plymouth Voyager Alarm Information )

2000 Plymouth Voyager Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Red or Pink	Ignition Switch Harness
Starter	Yellow	Ignition Switch Harness
Ignition	Dark Blue	Ignition Switch Harness
Ignition 2	Dark Green/Red	Ignition Switch Harness
Accessory	Black/White	Ignition Switch Harness
Tach	Gray/Red	Or Blue/Tan PCM Coil 2.4 Liter Engine
Neutral Safety Wire	Yellow (+)	Ignition Switch
Brake Switch	White/Light Brown	Brake Switch
Trunk Pin	Tan/Black	40 Pin Connector at Fuse Panel
Parking Lights	Light Green/White (-)	Head Light Switch Harness left of Column
Head Lamp	Green/Orange	Light Switch
Factory Disarm	White/Dark Green	(665 Ohm) left Connector bottom of Fuse Panel
Door Trigger	Brown/White (-)	Lower right Gray Connector at Fuse Panel
Door Lock	White/Dark Green (-)	BCM at Fuse Panel 1500 Ohm Resistor
Door Unlock	White/Dark Green (-)	White Connector B58 Connector 250 Ohm Resistor
Driver's Lock	Brown	Jamb Boot
Driver's Unlock	Black/Pink	Jamb Boot
Passenger Unlock	Purple/Yellow	Jamb Boot
Horn Wire	Black/Red	Steering Column
Windows Up	LF=Light Green, RF=Brown/White, LR=Blue, RR=Gray
Windows Down	LF=White, RF=Purple/White, LR=Red/White, RR=Dark Green

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.