1997 Acura RL Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1997 Acura RL Alarm Information )
1997 Acura RL Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | White |
Ignition Switch Harness at Fuse Panel |
Starter |
Black/White |
Ignition Switch Harness at Fuse Panel |
Ignition |
Black/Yellow |
Ignition Switch Harness at Fuse Panel |
Accessory |
Yellow |
Ignition Harness at Fuse Panel in Driver's Kick Panel |
Tach |
Blue |
In Green 22 Pin Connector, Passenger's Kick Panel |
Brake Switch |
Green/White |
Gray 18 Pin Connector left of Column |
Trunk Release |
Pink/Blue (-) |
Module Passenger's Kick Panel |
Trunk Pin |
Blue/Green (-) |
16 Pin Gray Connector left of Column or Module |
Parking Lights |
Red/Black (+) |
Or Red/Yellow Driver's Kick Panel Gray 18 Pin below Fuse |
Factory Disarm |
Green/Red (-) |
Green/White to Arm Module Passenger's Kick Panel |
Door Trigger |
Blue/Red (-) |
22 Pin Gray Connector Passenger's Kick Same as Locks |
Door Lock |
Green/Red (-) |
22 Pin Gray Connector at Control Module |
Door Unlock |
Green/White (-) |
Lower Passenger's Kick Panel |
Horn Wire |
Orange (-) |
Left of Column |
Windows Up |
LF=Red/Yellow, RF=Blue/White, LR=Blue/White, RR=Blue/White |
Windows Down |
LF=Blue/Red, RF=Blue/Red, LR=Blue/Red, RR=Blue/Red |
|
|
Follow the12volt.com
Saturday, September 14, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.