1998 Subaru Legacy Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Subaru Vehicles / 1998 Subaru Legacy

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Subaru Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Subaru Legacy Alarm Information )

1998 Subaru Legacy Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Black/Yellow	Ignition Switch Harness
Starter	Blue/Red	Ignition Switch Harness
Ignition	Red	Ignition Switch Harness
Accessory	Red/Yellow	Ignition Switch Harness
Tach	Blue	Coil
Brake Switch	White/Black	Brake Switch or Driver's Kick Panel
Trunk Pin	Yellow/Blue (-)	Driver's Kick Panel
Parking Lights	White/Yellow	Driver's Kick Panel above Fuse Panel
Head Lamp	Blue/Black (-)	Light Switch
Factory Disarm	White/Green (-)	Driver's Green/Yellow Factory Arm)
Door Trigger	Red/White (-)	Driver's Kick Panel
Door Lock	White/Red (-)	Door Lock Module above Fuse Panel 8 Pin CON
Door Unlock	White (-)
Horn Wire	Red/Blue	Horn Relay in Driver's Kick
Windows Up	LF=Blue/Red, RF=Red/Black, LR=Green/Black, RR=Green/White
Windows Down	LF=Blue, RF=Black/Blue, LR=Green/Yellow, RR=Blue/White

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.