1998 Toyota 4Runner Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Toyota Vehicles / 1998 Toyota 4Runner

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Toyota Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Toyota 4Runner Alarm Information )

1998 Toyota 4Runner Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White and White/Red	Ignition Switch Harness
Starter	Black	Ignition Switch Harness
Ignition	Black/Red	Ignition Switch Harness
Accessory	Black/Yellow	Ignition Switch Harness (Tests as Ignition.)
Tach	Black (AC)	Diagnostic Connector
Brake Switch	Green/White	Brake Switch
Trunk Pin	Red/White (-)	26 Pin Connector Driver's Kick
Parking Lights	Green (+)	13 Pin Connector on Back of Fuse Panel
Door Trigger	Black/White (-)	26 Pin Connector Driver's Kick
Door Lock	Red/White (-)	13 Pin Blue Connector in Driver's Kick
Door Unlock	Red/Yellow (-)
Horn Wire	Green/Red (-)	Steering Column

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.