1999 Toyota 4Runner Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Toyota 4Runner Alarm Information )
| 1999 Toyota 4Runner Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White or White/Red |
Ignition Switch Harness |
| Starter |
Green/Black or Green |
Ignition Switch Harness |
| Ignition |
Black/Yellow |
Ignition Switch Harness |
| Ignition 2 |
Black/Red |
Ignition Switch Harness |
| Tach |
Black (AC) |
Diagnostic Connector |
| Brake Switch |
Green/White |
Brake Switch |
| Trunk Pin |
Light Green/Red(-) |
Driver's Kick Panel |
| Parking Lights |
Green (+) |
Light Switch |
| Head Lamp |
Blue/Black (-) |
Light Switch |
| Hood Pin |
Green/Orange (-) |
DR. Firewall in Gray 26 Pin Connector |
| Factory Disarm |
w/Locks |
|
| Door Trigger |
Black Driver's Door |
Rear Doors Black/Red Driver's Kick see notes |
| Door Lock |
Brown/White (-) |
In Driver's Kick Panel (2 Pulse Unlock) |
| Door Unlock |
Blue/Black (-) |
And Red/Blue use Both Wire Diode. Isolate |
| Driver's Lock |
Blue/White |
Left Kick Panel |
| Driver's Unlock |
Pink/Green |
Left Kick Panel |
| Passenger Unlock |
Red |
Left Kick Panel |
| Horn Wire |
Green/Red (-) |
Steering Column |
| Windows Up |
LF=Light Green, RF=Red/Black, LR=Red/Blue, RR=Yellow |
| Windows Down |
LF=Blue/Yellow, RF=Red/Green, LR=Red/Yellow, RR=Green |
|
|
Follow the12volt.com
Wednesday, April 24, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
