1999 Toyota Celica Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Toyota Vehicles / 1999 Toyota Celica

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Toyota Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Toyota Celica Alarm Information )

1999 Toyota Celica Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White or Black/Red	Ignition Switch Harness
Starter	Black/Yellow	Ignition Switch Harness
Ignition	Black	Ignition Switch Harness
Ignition 2	Blue/Red	Ignition Switch Harness
Tach	Gray	Check Connector
Brake Switch	Green/White	Brake Switch or Driver's Kick Panel
Trunk Pin	Blue/Yellow (-)	Driver's Kick Harness (Junction Block)
Parking Lights	Dark Green (-)	Dimmer or Fuse Panel
Head Lamp	Red/Black (-)	Light Switch
Door Trigger	Red/White (-)	Driver's Kick Harness Running to Trunk
Door Lock	Blue/Black (-)	Door Lock Module right of Steering Column
Door Unlock	Blue (-)	And Green use Both Wires Diode Isolate
Horn Wire	Green (-)	Steering Column
Windows Up	LF=Green, RF=Green/White LR=Green/White, RR=Green
Windows Down	LF=Red, RF=Red/Blue LR=Red/White, RR=Red

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.