1998 Toyota Corolla Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Toyota Corolla Alarm Information )
| 1998 Toyota Corolla Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | White |
Ignition Switch Harness |
| Starter |
Red |
Ignition Switch Harness |
| Ignition |
Black/Yellow |
Ignition Switch Harness |
| Accessory |
Black/Yellow |
Ignition Switch Harness |
| Tach |
Blue/Yellow |
Distributor |
| Brake Switch |
Green/White |
Brake Switch |
| Trunk Release |
Red |
Rear Hatch Wagon only |
| Trunk Pin |
Red/White (-) |
Trunk Light Wagon Works with Dome Light |
| Parking Lights |
Dark Green (+) |
Driver's Kick Panel, White 9 Wire Connector |
| Head Lamp |
Red/White (-) |
Steering Column |
| Factory Disarm |
White/Green (-) |
Anti-Theft Module Passenger's Kick Panel |
| Door Trigger |
Red/White (-) |
White Connector behind Fuse Panel near Firewall |
| Door Lock |
Blue/White (-) |
Driver's Kick Panel, White 9 Wire Connector above Brown Connector |
| Door Unlock |
Blue/Yellow (-) |
And White, Diode Isolate |
| Horn Wire |
Blue/Red (-) |
Driver's Kick, White Connector next to Door Trigger |
| Windows Up |
LF=Green/Red, RF=Green/Red, LR=Red/Green, RR=Red/Black |
| Windows Down |
LF=Green, RF=Blue/White, LR=Blue/Black, RR=Yellow |
|
|
Follow the12volt.com
Thursday, July 3, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
