
2000 Toyota Corolla Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Toyota Corolla Alarm Information )
2000 Toyota Corolla Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Black/Red and White |
Ignition Switch Harness |
Starter |
Red |
Ignition Switch Harness |
Ignition |
Black/White |
Ignition Switch Harness |
Ignition 2 |
Black/Yellow |
Ignition Switch Harness |
Accessory |
Blue/Red |
Ignition Switch Harness |
Tach |
Black |
ECM |
Brake Switch |
Green/White |
Brake Switch |
Trunk Release |
Red |
Rear Hatch Wagon only |
Trunk Pin |
Red/White (-) |
Trunk Light Wagon Works with Dome Light |
Parking Lights |
Dark Green (+) |
Light Switch Harness or bottom Fuse Panel |
Head Lamp |
Red/White (-) |
Steering Column |
Factory Disarm |
Blue/Red (-) |
Driver's Kick Panel |
Door Trigger |
Red/White (-) |
Driver's Kick Panel |
Door Lock |
Light Blue/White(-) |
Driver's Kick |
Door Unlock |
Blue/Yellow (-) |
And White, Diode Isolate |
Driver's Lock |
Blue in DR. |
Kick Blue. in Passenger's Kick Panel (+) |
Driver's Unlock |
Red in DR. |
Kick Red in Passenger's Kick Panel (+) |
Horn Wire |
Green/Red (-) |
Steering Column |
Windows Up |
LF=Yellow, RF=Green/Red, LR=Red/Green, RR=Red/Black |
Windows Down |
LF=Green, RF=Blue/White, LR=Blue/Black, RR=Yellow |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.