1998 BMW 3 Series Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 BMW 3 Series Alarm Information )
| 1998 BMW 3 Series Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Red/Green or Red/Blue |
Ignition Switch Harness |
| Starter |
Black/Yellow |
Ignition Switch Harness |
| Ignition |
Green |
Ignition Switch Harness or Green Alarm Connector |
| Ignition 2 |
Purple |
or Purple/White Ignition Switch Harness |
| Accessory |
Purple or Purple/White |
Ignition Switch Harness or Alarm Connector |
| Tach |
Black |
Diagnostic Connector |
| Brake Switch |
Brown/White |
Brake Switch |
| Trunk Release |
Gray/Red (-) |
Switch in Dash |
| Trunk Pin |
White/Brown (-) |
Driver's Kick |
| Parking Lights |
Remove Switch |
4th Wire from left on Ribbon Cable |
| Head Lamp |
Yellow |
Light Switch |
| Hood Pin |
Purple/Green (-) |
Module behind Glove Compartment |
| Factory Disarm |
Blue/Red (-) |
Need to Pulse after Start for Remote Start |
| Door Trigger |
Red/Blue (+) |
Module behind Glove Compartment (this Wire DIMS) |
| Door Lock |
White/Red (-) |
Factory Alarm Connector behind Glove Compartment |
| Door Unlock |
Blue/Red (-) |
Factory Alarm Connector behind Glove Compartment |
| Horn Wire |
Brown/Red (-) |
Steering Column |
| Windows Up |
LF=Black/White, RF=Blue/Green, LR=Black/Yellow, RR=White/Yellow |
| Windows Down |
LF=Purple/White, RF=Yellow/Green, LR=Blue/Gray, RR=Blue/Red |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
