
1998 BMW 318 Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 BMW 318 Alarm Information )
1998 BMW 318 Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Red |
Ignition Harness Red/White Alarm Connector |
Starter |
Green |
Ignition Switch Harness and Green/Black at Alarm Plug |
Ignition |
Black/Yellow |
Ignition Switch Harness or Green Alarm Connector |
Ignition 2 |
Purple/White or Purple |
Ignition Switch Harness |
Accessory |
Purple or Purple/White |
Ignition Switch Harness or Alarm Connector |
Tach |
Black Coax |
Behind Instrument Cluster |
Brake Switch |
Blue/Red |
Brake Switch |
Trunk Pin |
Brown/White |
Factory Alarm Connector |
Parking Lights |
Gray/Purple |
And Gray/Yellow Head Light Switch Isolate |
Head Lamp |
Yellow |
Light Switch |
Door Trigger |
Brown/Gray (+) |
Brown/Blue and Brown/White Rear Door Diode Isolate |
Door Lock |
White/Red (+) |
Factory Alarm Connector or Driver's Kick White |
Door Unlock |
Blue/Red |
Behind Glove Compartment or Blue/Gray 5-Wire |
Horn Wire |
Brown/Red (-) |
Steering Column |
Windows Up |
LF=Black/White, RF=Blue/Green, LR=Black/Yellow, RR=White/Yellow |
Windows Down |
LF=Purple/White, RF=Yellow/Green, LR=Blue/Gray, RR=Blue/Red |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.