1998 Buick Park Avenue Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Buick Vehicles / 1998 Buick Park Avenue

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Buick Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Buick Park Avenue Alarm Information )

1998 Buick Park Avenue Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Red	Lamp Control Module Driver's Dash right of Column
Starter	Yellow	Ignition Switch Harness
Ignition	Pink	Ignition Switch Harness
Ignition 2	White	Ignition Switch Harness (PCM and BCM)
Ignition 3	Orange	Ignition Switch Harness (Heat/AC)
Accessory	Orange	Ignition Switch Harness
Tach	Purple/White	Distributor
Neutral Safety Wire	Yellow (-)	On Switch Rear of Transmission
Brake Switch	White	Brake Switch
Trunk Release	Black (-)	Switch
Trunk Pin	Red/Black (-)	BCM behind Passenger's Dash
Parking Lights	Brown (+)	Driver's Kick Panel
Head Lamp	Tan (+)	Lamp Control Driver's Dash right of Column
Factory Disarm	Light Green (-)	Driver's Door at Door Module Blue Connector
Door Trigger	Dark Blue (-)	Fuse Panel behind Passenger's Dash or BCM
Door Lock	Red/Black (-)	Switch Driver's Door Data Link Locks
Door Unlock	Orange/Black (-)	Must use Wires in Driver's Door
Driver's Lock	Gray	In Driver's Door
Driver's Unlock	Tan	In Driver's Door
Passenger Unlock	Pink	Driver's Door Harness from Rear Door
Horn Wire	Black (-)	Steering Column
Windows Up	LF=Dark Blue, RF=Dark Blue, LR=Dark Blue, RR=Dark Blue Data Link
Windows Down	LF=Brown, RF=Brown, LR=Brown, RR=Brown, Must go to each Door

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.