
2000 Cadillac Seville Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Cadillac Seville Alarm Information )
| 2000 Cadillac Seville Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Orange |
Ignition Switch Harness |
| Starter |
Yellow |
Ignition Switch Harness |
| Ignition |
Pink |
Ignition Switch Harness |
| Ignition 2 |
White |
Ignition Switch Harness |
| Ignition 3 |
Brown |
Ignition Switch Power |
| Accessory |
Orange |
Ignition Switch Harness (Heat/AC) |
| Tach |
Purple/White |
Ignition Coil |
| Brake Switch |
White |
Driver's Kick Panel |
| Trunk Release |
Light Blue (-) |
BCM behind Back Seat Passenger's Side |
| Trunk Pin |
Black (-) |
BCM behind Back Seat Passenger's Side |
| Parking Lights |
Brown/White (-) |
DIM Module Front of Blower Passenger's Kick Panel |
| Head Lamp |
White (-) |
DIM Module Passenger's Kick Panel |
| Factory Disarm |
Light Green (-) |
Driver's Door Module |
| Door Trigger |
Gray (-) |
Courtesy Light this Wire is Delay |
| Door Lock |
Red/Black (-) |
Inside Driver's Door above Door Speaker |
| Door Unlock |
Orange/Black (-) |
Must go in Door |
| Driver's Lock |
Gray |
Driver's Door Module in Door |
| Driver's Unlock |
Tan |
Driver's Door Module in Door |
| Passenger Unlock |
Tan |
Passenger's Door Module in Door above Passenger's SPEAK |
| Horn Wire |
Black (-) |
DIM Module see notes |
| Windows Up |
LF=Dark Blue, RF=Dark Blue, LR=Dark Blue, RR=Dark Blue |
| Windows Down |
LF=Brown, RF=Brown, LR=Brown, RR=Brown |
|
|
Follow the12volt.com
Friday, November 7, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.