1999 Chevrolet Venture Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Chevrolet Vehicles / 1999 Chevrolet Venture

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Chevrolet Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1999 Chevrolet Venture Alarm Information )

1999 Chevrolet Venture Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Red (2)	Ignition Harness One is 60 Amp and 40 Amp
Starter	Yellow	Ignition Switch Harness
Ignition	Pink	Ignition Switch Harness
Ignition 2	White	Ignition Switch Harness
Ignition 3	Brown	Ignition Switch Harness
Accessory	Orange	Ignition Switch Harness
Tach	White	PCM left Side of Engine in Air Filter
Brake Switch	White	Brake Switch
Trunk Release	Black (-)	Passenger's Side Kick Panel
Parking Lights	Brown (+)	Firewall Connector lower left Panel
Head Lamp	Yellow	Light Switch
Factory Disarm	Orange/Black (-)	16 Pin Connector Driver's Kick Panel
Door Trigger	Tan/Dark Blue (-)	Orange Diode Isolate Passenger's Kick BCM use ALL3
Door Lock	Light Blue (-)	Driver's Kick Panel
Door Unlock	White (-)	10 Pin Connector Negative Trigger
Driver's Lock	Gray	Left Kick Panel
Driver's Unlock	Tan	Left Kick Panel
Passenger Unlock	Tan	Right Kick Panel
Horn Wire	Black (-)	Steering Column
Windows Up	LF=Dark Blue, RF=Light Blue
Windows Down	LF=Brown, RF=Tan

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.