1997 Chrysler Cirrus Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1997 Chrysler Cirrus Alarm Information )
1997 Chrysler Cirrus Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | Red or Pink/Black or Red/Blue |
Ignition Switch Harness |
Starter |
Yellow |
Ignition Switch Harness |
Ignition |
Dark Blue |
Ignition Switch Harness |
Ignition 2 |
Dark Green/Red |
Ignition Switch Harness |
Ignition 3 |
Black/White |
Ignition Switch (Power, Heat) |
Accessory |
Black/Orange |
Ignition Switch Harness (Blower Motor) |
Tach |
Black/Gray |
Or Blue/Gray 4 Cylinder Engine (2 Cylinder Setting) |
Neutral Safety Wire |
Black/White (-) |
Gray 10 Pin Connector Driver's Front of Engine |
Brake Switch |
White/Tan |
Brake Switch |
Trunk Release |
Black/White |
Driver's Kick Panel |
Trunk Pin |
Tan/Black (-) |
Driver's Kick Panel |
Parking Lights |
Black/Yellow |
Driver's Kick Panel behind Fuse Panel |
Head Lamp |
Green |
Light Switch |
Factory Disarm |
Light Green/Orange |
From Driver's Door |
Door Trigger |
Yellow (-) |
Under Fuse Panel 6 Pin CON |
Door Lock |
White/Light Green |
Near Fuse Panel 20 Pin Connector |
Door Unlock |
White/Light Green |
Single Wire System 1.5 Ohm |
Horn Wire |
Green/Black (-) |
Steering Column White 3 Pin Connector |
Windows Up |
LF=Light Blue/Gold, RF=Brown/White, LR=Blue/White, RR=Gray/Black |
Windows Down |
LF=White/Gold, RF=Purple/White, LR=Red/Black, RR=Green/White |
|
|
Follow the12volt.com
Sunday, November 3, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.