1998 Chrysler Sebring Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Chrysler Vehicles / 1998 Chrysler Sebring

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Chrysler Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Chrysler Sebring Alarm Information )

1998 Chrysler Sebring Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	White	Ignition Switch Harness
Starter	Black/Red	Ignition Switch Harness
Ignition	Black/White	Ignition Switch Harness
Ignition 2	Blue	Ignition Switch Harness
Accessory	Blue/Black	Ignition Switch Harness
Tach	Brown	ECM, Driver's Shock/Strut Tower
Neutral Safety Wire	Black/Yellow (-)	Switch Driver's Side of Transaxle
Brake Switch	Green	Brake Switch
Trunk Pin	Red/Green (-)	Driver's Kick Panel
Parking Lights	Green/White (+)	Left of Steering Column or Driver's Kick Panel
Head Lamp	Red (-)	Light Switch
Factory Disarm	Green/White (-)	Driver's Door Harness
Door Trigger	Red/Green (-)	Driver's Kick Panel
Door Lock	Brown/White (-)	Driver's Kick Panel
Door Unlock	Brown (-)
Horn Wire	Green/Black (-)	Steering Column
Windows Up	LF=Green/Red, RF=Brown/Yellow
Windows Down	LF=Green/Black, RF=Green/Yellow

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.