1998 Chrysler Town and Country Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Chrysler Town and Country Alarm Information )
| 1998 Chrysler Town and Country Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Red or Pink/Black |
Ignition Switch Harness |
| Starter |
Yellow |
Ignition Switch Harness |
| Ignition |
Dark Blue |
Ignition Switch Harness |
| Ignition 2 |
Black/White |
Ignition Switch Harness |
| Ignition 3 |
Dark Green/Red |
Ignition Switch Harness |
| Accessory |
Black/Orange |
Ignition Switch Harness |
| Tach |
Gray |
Or Blue/Tan PCM Coil 2.4 Liter Engine |
| Neutral Safety Wire |
Black/White |
Power Control Module |
| Brake Switch |
White/Tan |
Brake Switch |
| Trunk Pin |
Tan/Black |
40 Pin Connector at Fuse Panel |
| Parking Lights |
Light Green/White (-) |
Head Light Switch Harness left of Column |
| Head Lamp |
Green/Orange |
Light Switch |
| Factory Disarm |
White/Dark Green |
(665 Ohm) left Connector bottom of Fuse Panel |
| Door Trigger |
Brown/White (-) |
Lower right Gray Connector at Fuse Panel |
| Door Lock |
White/Dark Green |
BCM at Fuse Panel |
| Door Unlock |
White/Dark Green |
White Connector B58 Connector |
| Horn Wire |
Black/Red |
Steering Column |
| Windows Up |
LF=Light Green, RF=Brown/White, LR=Blue, RR=Gray |
| Windows Down |
LF=White, RF=Purple/White, LR=Red/White, RR=Dark Green |
|
|
Follow the12volt.com
Thursday, December 5, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
