
2000 Dodge Avenger Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Dodge Avenger Alarm Information )
2000 Dodge Avenger Alarm, Remote Start, Keyless Entry Wiring Information |
Constant 12V+ | White |
Ignition Switch Harness |
Starter |
Black/Red |
Ignition Switch Harness |
Ignition |
Black/White |
Ignition Switch Harness |
Ignition 2 |
Blue/Black |
Ignition Switch Harness |
Accessory |
Blue |
Ignition Switch Harness |
Tach |
Brown |
Coil Pack |
Neutral Safety Wire |
Black/Yellow (-) |
Switch Driver's Side of Transmission |
Brake Switch |
Green |
Brake Switch |
Trunk Pin |
Red/Green (-) |
Trunk Light |
Parking Lights |
Green/White (+) |
18 Pin Connector at Fuse Panel |
Head Lamp |
Red/Silver |
Light Switch or Steering Column Harness |
Factory Disarm |
Light Green/Orange |
Driver's Door Boot or Green/White Driver's Kick Panel |
Door Trigger |
Red/Green (-) |
Driver's Kick or Black 19 Pin Connector on Back of Fuse |
Door Lock |
Brown/White (-) |
Driver's Kick Panel or Relay below Radio |
Door Unlock |
Brown (-) |
|
Driver's Lock |
Blue/Black |
Behind Fuse Panel |
Driver's Unlock |
Blue/Red |
Behind Fuse Panel |
Passenger Unlock |
Brown |
Behind Fuse Panel |
Horn Wire |
Green/Black (-) |
Steering Column White 3 Pin Connector |
Windows Up |
LF=Green/Red, RF=Brown/Yellow MAIN |
Windows Down |
LF=Green/Black, RF=Green/Yellow |
|
|
Follow the12volt.com
Thursday, May 1, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.