1998 Dodge Durango Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Dodge Vehicles / 1998 Dodge Durango

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Dodge Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Dodge Durango Alarm Information )

1998 Dodge Durango Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Pink/Black or Red	Ignition Switch Harness
Starter	Yellow	Ignition Switch Harness
Ignition	Dark Blue (+)	Ignition Switch Harness
Ignition 2	Black/Orange	Ignition Switch Harness (Heat/AC)
Accessory	Black/Orange	Ignition Switch Harness
Tach	Black/Gray	Coil
Neutral Safety Wire	Yellow	Lower left of Dash 16 Pin Connector Position 3
Brake Switch	White/Tan	Brake Switch
Trunk Release	Tan/Black	18 Pin CON
Trunk Pin	Tan/Black (-)	16 Pin Connector below Fuse Panel
Parking Lights	Black/Yellow (+)	18 Pin Connector Position 1 Head Light Switch
Head Lamp	Light Green (+)	Light Switch
Factory Disarm	Light Green/Orange(-)	18 Pin Connector Driver's Kick Panel Position 10 Same Wire Arm
Door Trigger	Yellow (-)	Head Light Switch or Courtesy Light SEE NO
Door Lock	Orange/Purple	18 Pin Connector Position 4 Module right of Dash
Door Unlock	Pink/Purple	Position 13 (+) w/Keyless Reverse Polarity w/o Keyless
Driver's Lock	Orange/Black	Driver's Kick Panel
Driver's Unlock	Blue	Driver's Kick Panel
Passenger Unlock	Pink/Black	Driver's Kick Panel
Horn Wire	Black/Red (-)	Steering Column Harness
Windows Up	LF=Light Blue, RF=Brown/White, LR=Blue/White, RR=Gray/Black
Windows Down	LF=White, RF=Purple/White, LR=Red/Black, RR=Green/White

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.