
2000 Dodge Intrepid Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Dodge Intrepid Alarm Information )
| 2000 Dodge Intrepid Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Pink/Black or Red |
Ignition Switch Harness |
| Starter |
Yellow |
Ignition Switch Harness |
| Ignition |
Dark Blue/White |
Ignition Switch Harness |
| Ignition 2 |
Green/Red |
Ignition Switch Harness (Air Bag Light) |
| Accessory |
Black/White |
Ignition Switch Harness |
| Tach |
Tan/White |
Any Coil, Use 1 Cylinder Setting |
| Neutral Safety Wire |
Tan/White (-) |
Power Control Module PCM see notes |
| Brake Switch |
White/Tan |
Brake Switch |
| Trunk Release |
Black/White (+) |
Switch |
| Trunk Pin |
Tan/Black (-) |
Black 22 Pin Connector Driver's Kick Panel |
| Parking Lights |
Black/Yellow (+) |
Driver's Kick Panel |
| Head Lamp |
Purple (+) |
Or Purple/Red Fuse Panel Driver's Kick Panel |
| Factory Disarm |
Light Green/Orange (+) |
Driver's Kick Panel |
| Door Trigger |
Yellow (-) |
Brown Connector at Rear of Fuse Panel |
| Door Lock |
White/Dark Green (+) |
22 Pin Connector Driver's Kick Panel 2.7K Ohm Lock |
| Door Unlock |
White/Dark Green (+) |
620 Ohm Unlock One Wire see notes |
| Driver's Lock |
Orange |
BCM |
| Driver's Unlock |
Dark Blue |
BCM |
| Passenger Unlock |
Pink/Black |
BCM |
| Horn Wire |
Black/Red (-) |
Horn Relay in Fuse Panel |
| Windows Up |
LF=Light Blue/Gold, RF=Brown/White, LR=Blue/White, RR=Gray/Black |
| Windows Down |
LF=White/Gold, RF=Purple/White, LR=Red/Blue, RR=Green/White |
|
|
Follow the12volt.com
Thursday, October 30, 2025
• Copyright © 1999-2025 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.