1998 Dodge Van (fullsize) Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Dodge Vehicles / 1998 Dodge Van (fullsize)

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Dodge Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Dodge Van (fullsize) Alarm Information )

1998 Dodge Van (fullsize) Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Red/White or Red	Ignition Switch Harness
Starter	Yellow/Brown	Ignition Switch Harness
Ignition	Dark Blue or Pink	Ignition Switch Harness
Ignition 2	Black/Orange	Ignition Switch Harness
Accessory	Black/Orange	Ignition Switch Harness (Heat/AC)
Tach	Gray	PCM Center of Firewall near Master Cylinder
Neutral Safety Wire	Brown/Yellow (-)	PCM Center of Firewall near MAST CYLINDER
Brake Switch	White/Tan	Brake Switch
Trunk Pin	Yellow (-)	16 Pin Connector above Brake Pedal
Parking Lights	Black/Yellow (+)	Light Switch
Head Lamp	Light Green (+)	Light Switch
Factory Disarm	Black/Orange (-)	12 Pin Connector Driver's Kick Panel
Door Trigger	Yellow (-)	16 Pin Connector above Brake Pedal
Door Lock	Orange/Purple	Driver's Door Boot or behind Glove Compartment
Door Unlock	Pink/Purple	Positive Trigger or Reverse Polarity w/o Keyless Entry
Horn Wire	Black/Red (-)	Steering Column
Windows Up	LF=Light Blue, RF=Brown/White
Windows Down	LF=White, RF=Purple/White

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.