1997 Ford Expedition Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Ford Vehicles / 1997 Ford Expedition

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Ford Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1997 Ford Expedition Alarm Information )

1997 Ford Expedition Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Green/Purple or Yellow	Ignition Switch Harness
Starter	Red/Light Blue	Ignition Switch Harness
Ignition	Blue/Green or Red/Green	Ignition Switch Harness
Ignition 2	Black/Green	Ignition Switch Harness
Ignition 3	Red/Black	Ignition Switch Harness (Transmission)
Accessory	Gray/Yellow	Ignition Switch Harness (Heater/Air Bag)
Tach	Pink/White	Coil
Neutral Safety Wire	Not Grounding	OEM Switch opens Starter Circuit
Brake Switch	Light Green	Brake Switch
Trunk Release	White/Purple (-)	Driver's Kick Panel 20 Pin Connector
Trunk Pin	White/Purple (-)	Driver's Kick or use Same Wire as Door Trigger
Parking Lights	Brown (+)	In Driver's Kick Panel
Head Lamp	Red/Yellow (+)	Switch on DashBoard
Factory Disarm	Dark Green/Purple(-)	Driver's Kick Panel
Door Trigger	Blue/White(-)	RAP Module under Dash DRIVE Side
Door Lock	Pink/Yellow (-)	Keyless Module under Dash Negative
Door Unlock	Pink/Light Green(-)	Reverse Polarity w/o Keyless Entry
Horn Wire	Dark Blue (-)	Steering Column
Windows Up	LF=White/Black, RF=Tan/Blue, LR=Yellow/Blue, RR=Red/Black
Windows Down	LF=Tan/Light Blue, RF=White/Yellow, LR=Gray/Orange, RR=Yellow/Black

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.