2000 Ford Mustang Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Ford Vehicles / 2000 Ford Mustang

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Ford Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Ford Mustang Alarm Information )

2000 Ford Mustang Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Yellow or Light Green/Purple	Ignition Switch Harness
Starter	White/Pink	Ignition Switch Harness
Ignition	Red/Light Green	Ignition Switch Harness
Ignition 2	Gray/Yellow	Ignition Switch Harness
Accessory	Gray/Yellow	Ignition Switch Harness
Tach	Light Green/White	Power Control Module behind right Kick
Neutral Safety Wire	White/Pink	Ignition Switch Harness
Brake Switch	Red/Green	Brake Switch
Trunk Release	Purple/Yellow (+)	Switch or Driver's Kick Panel
Trunk Pin	Brown/White (-)	GEM Module Position 3 left Side of Dash
Parking Lights	Brown (+)	Light Switch or Driver's Kick Panel
Head Lamp	Yellow/Red (+)	Light Switch
Factory Disarm	Dark Green/Purple	Keyless Module. above Driver's Kick (-)
Door Trigger	Black/White (+)	GEM Module left Side of Dash near Kick
Door Lock	Light Green (+)	Keyless Module above Driver's Kick
Door Unlock	Purple (+)	Keyless Module above Driver's Kick
Driver's Lock	Red/White	Left Kick Panel
Driver's Unlock	Red/Orange	Left Kick Panel
Passenger Unlock	Pink/Orange	Left Kick Panel
Horn Wire	Yellow/Green (-)	Ignition Switch Harness
Windows Up	LF=White/Black, RF=White/Yellow, LR=Gray/Orange, RR=Red/Black
Windows Down	LF=Yellow, RF=Tan/Light Blue, LR=Yellow/Blue, RR=Yellow/Black

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.