1998 Ford Windstar Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Ford Vehicles / 1998 Ford Windstar

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Ford Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1998 Ford Windstar Alarm Information )

1998 Ford Windstar Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Yellow	Ignition Switch Harness
Starter	Red/Blue or White/Pink	White/Pink w/o Alarm in Ignition Switch Harness
Ignition	Red/Green	Ignition Switch Harness
Ignition 2	Black/Pink	Ignition Switch Harness
Ignition 3	Black/Light Green	Ignition Switch
Accessory	Gray Yellow	Ignition Switch Harness
Tach	White/Pink (AC)	PCM Passenger's Rear of Engine on Firewall
Neutral Safety Wire	Not Grounding	OEM Switch opens Starter Circuit
Brake Switch	Red/Green	Brake Switch
Trunk Release	Purple/Yellow (+)	Keyless Entry in Center Console
Trunk Pin	Black/Light Blue (+)	14 Pin Black Connector Driver's Kick Panel
Parking Lights	White/Black (+)	Heavier of Two at Switch, Brown Driver's Kick Panel
Head Lamp	Red/Yellow (+)	Light Switch
Factory Disarm	Dark Green/Purple (-)	Driver's Kick Panel
Door Trigger	Black/Light Blue (+)	Driver's Kick or Black/Yellow (-) Driver's Door Boot
Door Lock	Pink/Yellow (-)	Back of Relay Bank, left of Driver's under Dash.
Door Unlock	Pink/Light Green (-)
Horn Wire	Yellow/Light Blue (-)	Steering Column
Windows Up	LF=White/Black, RF=White/Yellow
Windows Down	LF=Yellow, RF=Tan/Light Blue

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.