spacer spacer spacer spacer

1995-97 Chrysler New Yorker Cruise Control Wiring

Vehicle Search Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
1995-97 Chrysler New Yorker Cruise Control Information )

1995-97 Chrysler New Yorker Cruise Control Wiring Information
Constant 12V+ Pink/Black or Red  Ignition Switch Harness or Use Hot Side of Brake
Switched 12V+ Dark Blue/Gold  Ignition Switch Harness 
Ground Use Chassis  Near Cruise Control Module 
Hot Side of Brake n/a  Brake Switch 
Cold Side of Brake White or White/Tan  Brake Switch 
Tach Red  White or Black At Coil Set 2 Cylinder 
VSS Wire White/Orange  Passenger's Front Fender PCM Position 47 or PO 58 
Pulses Per Mile 8000 PPM 
Notes: Vehicles with Manual Transmission require Clutch Switch. Some vehicles may require a speed signal generator and/or other parts/adapters not listed above. Rostra® Cruise Control module switch settings may differ if you use a speed signal generator or magnets and a pick up coil.

Follow Follow on Facebook
Sunday, June 23, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer