spacer spacer spacer spacer

1999 Ford Expedition Cruise Control Wiring

Vehicle Search Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
1999 Ford Expedition Cruise Control Information )

1999 Ford Expedition Cruise Control Wiring Information
Constant 12V+ Green/Purple or Yellow  Ignition Switch Harness or Use Hot Side of Brake
Switched 12V+ Blue/ Light Green  Ignition Switch Harness 
Ground Use Chassis  Near Cruise Control Module 
Hot Side of Brake n/a  Brake Switch or Driver's Kick Panel 
Cold Side of Brake Light Green  Brake Switch or Driver's Kick Panel 
Tach Pink/White 4.6L  Or Light Green/White For 5.4L 
VSS Wire Gray/Black  Pin 9 at Radio Harness. or Pin 68 at ECM (Engine) 
Pulses Per Mile 8000 PPM 
Notes: Vehicles with Manual Transmission require Clutch Switch. Some vehicles may require a speed signal generator and/or other parts/adapters not listed above. Rostra® Cruise Control module switch settings may differ if you use a speed signal generator or magnets and a pick up coil.

Follow Follow on Facebook
Monday, August 21, 2017 • Copyright © 1999-2017 Donate to Advertising Top of Page
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information. spacer spacer spacer
Donate to
Top spacer spacer