removing as tcbm

Home / the12volt's Install Bay / Car Security and Convenience / removing as tcbm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

66fasty

Member - Posts: 2

Joined: February 19, 2009

Location: California, United States

Posted: February 19, 2009 at 4:19 PM / IP Logged

New member here,I havent been able to get a definate answer from the best buy installers,So Im hoping you guys can help.

I bought a 98 expedition that had an alarm/remote start installed .It was removed and now Im left with the audiovox as-tcbm module which wont work if I put the steering column cover on and sometimes it just randomly wont work.

Id like to remove it and get a new key cut and programmed so I can have atleast the factory security.Ive dug out everything under the dash and this is what Im left with(aside from the energizing ring around the ignition.)

removing as tcbm - Last Post -- posted image.

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: February 19, 2009 at 9:03 PM / IP Logged

I am not following your post. What is it you are trying to do? Maybe explaining it a little more might help. Each time I read the post I get more confused.

Are you trying to remove the system?

What do you mean "and now I am left with the audiovox as-tcbm module..."

Did you remove the system and now the vehicle will not start?

Are you trying to get your remote start working again?

Installer, IT support, and FFL. I need less hobbies.

66fasty

Member - Posts: 2

Joined: February 19, 2009

Location: California, United States

Posted: February 19, 2009 at 10:39 PM / IP Logged

Alarm and remote start were removed from vehicle.I want to remove the as tcbm.I already figured it out though.Just heat shrunk all the connections and put the key half on my key ring until I can get a new key cut and programmed at ford.

Thank you,

Philip

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 20, 2009 at 4:26 PM / IP Logged

I've sussed it I think, whatever the hell it is fasty is talking about, I think they left the bypass module behind and the chip in that key isn't talking to the PATS 'cause there's a second key there...oh side it I've confused myself now.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

removing as tcbm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.