Shock sensor set-up

Home / the12volt's Install Bay / Car Security and Convenience / Shock sensor set-up (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Car-Stuff

Member - Posts: 26

Joined: March 02, 2003

Location: United Kingdom

Posted: March 25, 2003 at 3:37 PM / IP Logged

I have started using some DEI products and would welcome opinions on how you set up the in-built dual stage shock sensor.

I set it so if I bang on the rear window (not to heavy) it triggers the warn-away and then if I give it a good smack, it goes to full alarm.

I have not had any comebacks for false alarming so far...

Nick

NB:- Using Avital & Hornet

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 25, 2003 at 6:04 PM / IP Logged

sounds like you are on the right track.

im sure you will have a false alarm here and there, but with that kind of sensor its bound to happen.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Shock sensor set-up

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.