autopage rs665 to idatalink wires

Home / the12volt's Install Bay / Car Security and Convenience / autopage rs665 to idatalink wires (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dwljpl

Member - Posts: 20

Joined: February 08, 2010

Posted: February 26, 2010 at 5:48 PM / IP Logged

I have an Autopage RS-665 remote start that I'm going to wire to an idatalink DLSL-GM bypass and I'm wondering if I need to hook the disarm and rearm wires from the remote start to the bypass or if I hook the lock and unlock wires to the bypass instead. If that's the case do I need to diode isolate the lock and unlock wires so it's not feeding +12 volts into a negative input?

Back to Top

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: February 26, 2010 at 9:50 PM / IP Logged

Most of these newer bypasses do factory disarm/rearm through data...etc......WHAT kind of CAR...! Its kinda hard to lead you in any direction w/o the most important part...THE CAR...?

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Back to Top

dwljpl

Member - Posts: 20

Joined: February 08, 2010

Posted: February 26, 2010 at 10:07 PM / IP Logged

Sorry, it's a 2004 Pontiac Grand Prix.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autopage rs665 to idatalink wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.