push to start toyota camry 2010

Home / the12volt's Install Bay / Car Security and Convenience / push to start toyota camry 2010 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: December 20, 2010 at 5:21 PM / IP Logged

Using Avital 1 way remote start/keyless (4103) and the idatalink ADS-AL(DL)-TL1 (type 3)

is the only wire coming from the thick gauged remote start wiring is the two 12volt red, pink iginition (connected to pin 7 of the ECU), and the purple stater wire (connected to the bypass and NOT the car)?

any other suggestions or pointers with this car.

greatly appreceiated,

jason

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 20, 2010 at 6:31 PM / IP Logged

You are correct. Wire it exactly as stated in the TL1 manual and it will work fine. Get power from the fuse box power wire, be sure to add the diode. No other connections to the car are needed as the TL1 software does it all for you thru CAN data...

Mike M2

Tech Manager

CS Dealer Services

Thack79

Silver - Posts: 526

Joined: December 02, 2003

Location: Virginia, United States

Posted: December 20, 2010 at 7:01 PM / IP Logged

whats the deal with the auto lights i here with his car (and the highlander i believe)? ive heard/reading of people opening the auto wire, pulsing door pins, etc.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 21, 2010 at 5:22 PM / IP Logged

If the auto lights are left on when it remote starts they will not shut off because they don't see the drivers door open and close to start the timer. You can either pulse the driverrs door pin after the RS shuts off, or do like i do and add a relay to break the auto light wire whenever the RS is on....

Mike M2

Tech Manager

CS Dealer Services

tianot

Copper - Posts: 155

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 25, 2009

Location: Alberta, Canada

Posted: December 21, 2010 at 10:51 PM / IP Logged

hey mike, how to add relay on that one, the auto light?

thanks

tianot

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 22, 2010 at 7:18 AM / IP Logged

take a relay

85 - GWR

86 - constant 12v

Cut the autolight wire

87a - autolight wire switch side

30 - autolight wire light side

i ususally just pulse the driver door pin OR you can pulse the autolight shut off wire at the switch as well. I beleive its red (-). I will check that foryou again.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

push to start toyota camry 2010

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.