the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

canmax400 in a 2010 prius


Post ReplyPost New Topic
< Prev Topic Next Topic >
niper0108 
Member - Posts: 15
Member spacespace
Joined: August 05, 2003
Location: United States
Posted: February 13, 2011 at 11:18 PM / IP Logged  

Thanks for your help. That fixed it. The instructions assume that the remote starter installed uses the same wire for IGN input & output. Had I known that originally, it would have saved me several hours of troubleshooting, checking connections, reprogramming, etc. And frustration. I have installed hundereds of remote starters & this one was much more difficult than it needed to be based on the way the instructions of the module were written. I can ony hope others didnt experience the same frustrations.  

Thanks again.

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer