the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Shock sensor mounting


Post ReplyPost New Topic
< Prev Topic Next Topic >
turd 
Member - Posts: 21
Member spacespace
Joined: April 08, 2003
Location: Canada
Posted: April 24, 2003 at 12:46 PM / IP Logged  

Do you mount your shock sensor with screws directly to firewall?

Or do you simply zip tie it to some bracket?

And why?

enforcerviper 
Member - Posts: 26
Member spacespace
Joined: March 25, 2003
Posted: April 24, 2003 at 1:17 PM / IP Logged  

When I got my alarm installed for me the installer screwed it to the steering column.  This didn't work for me at all.  It only sensed the front drivers fender, nothing else.  I relocated it using zipties to an air vent.  Now it works perfectly all over the car.

The only problem I face now is when people with loud music and a LOT of bass come by, the vibration triggers the warn away of the shock sensor.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer