the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amp


Post ReplyPost New Topic
< Prev Topic Next Topic >
renzpeed 
Member - Posts: 1
Member spacespace
Joined: March 02, 2012
Location: California, United States
Posted: March 21, 2012 at 8:05 PM / IP Logged  

hi,

I have 2 rockford P3SD412, anybody can help on amplifier or how much watts do I need.

I have a soundstream pca2.760, I was wondering if I can still use it and how do I wire them.

thanks.

wheelerdr 
Copper - Posts: 337
Copper spacespace
Joined: October 25, 2004
Location: Louisiana, United States
Posted: March 22, 2012 at 1:07 AM / IP Logged  
if going ahead with that amp wire the subs them selves in series to get 8 ohm  put them in the enclosure now you should have 8 ohms at your enclosure terminals wire from your enclosure terminals in parallel to the amp this will give you 4 ohms @ 760. but this would be a little light load on the subs . if you are on a tight budget you can pick up a Hifonics brutus BRZ 1200.1D wire the subs them selfes parell to give you 2 ohms each put them in the enclosure this will give you 2 ohms at the enclosure terminal and the wire them to the amp in parallel this would give you a 1 ohm load and this amp can do 1 ohm all day with out getting hot. that would give you 1200 watts rms 600 rms per sub 

 


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer