compustar 2w901r ss programing?

You're welcome, I'm glad you got it working and didn't have to go to your installer again! This should be basic stuff, but unfortunately the instructions are missing for this remote. If you don't think you counted right you can always do it again, and count the light flashes instead of the chirps. The flashes are very slow compared to the chirps. I think it expects the option # after the lights stop flashing anyway, so better count them, and once they stop, only then press the button for the option you want.

I think I got all the options I wanted, just hope I didn't change another one by accident...

My system does not do the chirps...  I even tried enabling this and it wouldn't work?

Does the installer have to wire to the horn circuit?  If so I don't think he did or the system (remote start only) Startit system NO alarm features...?

Now if a member does a search this info will be just what they need for the new 901 SS

Yes the StartIt has no siren. Installer has to install a siren, and get wires through the firewall. I got a hood pin and siren installed as part of the deal. Most of the cost is in the remotes, there isn't a huge difference between the startIt and maxIt 'brain' .. I'd recommend the full system for the small price difference.

What advantages does the Maxit system offer?  I told the installer all I wanted was #1 RANGE and just a starter.

You get an alarm as well with siren, shock sensor, and monitoring of doors/trunk/hood. If they're going to all the trouble to put in the starter I figure why not add this too.. I was charged about $100 for the install, I doubt remote start only is much less.