2003 Toyota Tacoma, EasyGuard EC002

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Toyota Tacoma, EasyGuard EC002

Welcome Guest :)

Members

< Prev Topic Next Topic >

gusto11071

Member - Posts: 2

Joined: February 23, 2026

Location: New York, United States

Posted: February 25, 2026 at 12:09 PM / IP Logged

I have a 2003 Toyota Tacoma and it does have built in dome light supervision , I am working with a EasyGuard EC002 which does not have a Dome Light Supervision wire connection. I want to connect my door triggers with diodes to isolate any backfeed to a relay and then directly to the dome light itself. Would that be the correct way to make my connections?

Always Evolving

gusto11071

Member - Posts: 2

Joined: February 23, 2026

Location: New York, United States

Posted: February 25, 2026 at 12:14 PM / IP Logged

My tacoma sends the door trigger to the BCM and then to the dome light negative trigger side.

Always Evolving

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.