info on ports in fiberglass boxes?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / info on ports in fiberglass boxes? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: August 02, 2003 at 9:42 PM / IP Logged

Has anyone ever put a port in a fiberglass box or heard on or is it not practical? I am thinking about putting ports on my box so Any feedback is appreciated

dream it, build it, fiberglass it

iaudio

Copper - Posts: 82

Joined: March 17, 2003

Posted: August 02, 2003 at 9:48 PM / IP Logged

The sentra and the tacoma on my site are both ported.

e_lectro

Member - Posts: 4

Joined: May 25, 2003

Location: United States

Posted: August 08, 2003 at 1:10 AM / IP Logged

My latest box is ported. I cut a hole big enough to get the port in, used liquid nails on the back to hold it in place, and then filed in the small gap around the outside edge in with bondo. Now that its painted, the port looks like part of the box, not just a plastic tube.

2004 Nighthawk Black TSX - Ebony, Navi, 6spd

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

info on ports in fiberglass boxes?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.