Remote Starts

Home / the12volt's Install Bay / Car Security and Convenience / Remote Starts (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

miller

Member - Posts: 4

Joined: August 07, 2003

Location: Australia

Posted: August 18, 2003 at 5:45 AM / IP Logged

Has anyone come across hooking up the door trigger input to the interior light and the interior light being one of those ones that fade out and turn on ever time the ignition is turned off.

I am finding that the alarm is going off everytime you activate and then deactivate the remote start.

Do i have to directly to the door pins and use diodes or is there something else i can do????

thanks

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: August 21, 2003 at 10:15 AM / IP Logged

truck model and alarm model?

move the trigger wire to the proper point and or delay the amount of time the system takes before it actually starts looking at it's inputs.

jgstone

Member - Posts: 12

Joined: August 20, 2003

Location: United States

Posted: August 21, 2003 at 11:19 AM / IP Logged

use a diode to limit the resistance if the door trigger is negative trigger put the diodes cathode side towards the door trigger. if it is positive trigger then reverse the diode. this should take care of the alarm reading the domelight delay.

I like cars more than women, because their the perfect challenge.

___

______| \___

|_0___|____0_ }

CruisinS&S

Copper - Posts: 225

Joined: February 05, 2003

Location: United States

Posted: August 21, 2003 at 5:29 PM / IP Logged

Is your factory alarm going off or is it an aftermarket unit?

Cruisin Security And Sounds

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Starts

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.