How would one go about creating Screen

Something that looks similar to this:

I have made your basic kickpanels, pods on door panels but when it comes to incorporating a tv screen, how can one be mad to mount like this?

Would I just create like a baffle out of mdf, cut to fit the screen and then once it is fiberglassed, lay the screen in? If so, what method would be the best way to hold it down to the mold?

http://www.mobiledynamics.com/main/toronto/pages/screeninstall.html

do it very similar to this. I know this is a seat rest, but it would work on the same principle. I would do all the fiberglassing, and as you are fiberglassing, use some mdf covered in release agent. Cut the mdf to the exact size of the screen, pit it on the mold where you want the screen, and that way when done, you will have a hole there to fit the screen. mount the screen, attach the bezel, and yo uare done.