Ultra Start 4500 '91 Toyota Previa

Home / the12volt's Install Bay / Car Security and Convenience / Ultra Start 4500 '91 Toyota Previa (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Autocad

Member - Posts: 3

Joined: November 17, 2003

Location: Canada

Posted: November 17, 2003 at 8:57 AM / IP Logged

Hi all

I am installing Ultra Start 4500 on (Start/Alarm) a 91 Toyota PreviaI was wondering it is neccessary to hook up the two wires for Door trigger (+/-)By the way what do these do? what is the affect if you don't hook up?Also with passenger unlock (pink wire from unit) where do I connect this too.

Thanks

AutoCad

autocad

vaderfop

Copper - Posts: 95

Joined: April 18, 2003

Location: United States

Posted: November 17, 2003 at 11:12 AM / IP Logged

The passenger door unlock wire should be for, if you need a second pulse to unlock all you doors, i.e. if you can unlock you driver's door seperate from the rest of your doors you then need this wire to be connected so that all your doors will unlock with your alarm disarm.

The door trigger wire is for if someone opens one of your doors the alarm will be triggered. You do not need both of the wires. For your car you only need the (-) negitive trigger. It should be a RED / yellow wire under the left side of your dash.

Remember check all your wires with a DMM!

Autocad

Member - Posts: 3

Joined: November 17, 2003

Location: Canada

Posted: November 26, 2003 at 2:19 PM / IP Logged

AUTOCAD wrote:

Hi all

I am installing Ultra Start 4500 on (Start/Alarm) a 91 Toyota Previa I was wondering it is neccessary to hook up the two wires for Door trigger () By the way what do these do? what is the affect if you don't hook up? Also with passenger unlock (pink wire from unit) where do I connect this too.

Thanks

AutoCad

Hi all

Please help! (Utra start 4500)

I can't figure out why the my vehicle sometime start by itself.

First of all, the temperature sensor is not installed and the Timer Mode is not set to on

I have tried to disable the Timer Mode many times (if it is on) but that didn't fix the problem

I came home the other day and found the van running, so turn it off by stepping on the brake

According to manual, the Timer Mode will automatically disable itself after 24 hours

So I don't what cause it to start.

Thanks all

autocad

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ultra Start 4500 '91 Toyota Previa

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.