Vacuum lock system and Very hot wire

Home / the12volt's Install Bay / Car Security and Convenience / Vacuum lock system and Very hot wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

burnerofhells

Copper - Posts: 57

Joined: September 06, 2003

Location: Belize

Posted: January 21, 2004 at 12:29 PM / IP Logged

ok... but which wires form my wiring harnes on my alarm go where on that diagram?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 21, 2004 at 12:52 PM / IP Logged

The first relay pin 86 is your alarm's LOCK (-) output and the second relay pin 85 goes to the UNLOCK (-) output of the alarm

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

burnerofhells

Copper - Posts: 57

Joined: September 06, 2003

Location: Belize

Posted: January 21, 2004 at 7:28 PM / IP Logged

Which LOCK (-) output should i use from my alarm?

Lock 87a (normally closed) or Lock 30 (common)

Which UNLOCK(-) output should i use from my alarm?

Unlock 87a (normally closed) or Unlock 30 (common)

Any what do i do with the last wire the Lock/Unlock 87 (normally closed) wire?

Do i just tape the ends of the other wires and not use them?

Sorry for so many questions.

burnerofhells

Copper - Posts: 57

Joined: September 06, 2003

Location: Belize

Posted: January 21, 2004 at 10:58 PM / IP Logged

For get it. the original diagram works now. Im not sure why it burnt up a resistor and melted a hole in my door locks but now that i ripped the resistor out she works perfectly.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Vacuum lock system and Very hot wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.