mono amp/mono input? Harman/Kardon C/O

Home / the12volt's Install Bay / Car Audio / mono amp/mono input? Harman/Kardon C/O (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

acme

Member - Posts: 21

Joined: December 26, 2003

Location: United States

Posted: January 25, 2004 at 1:22 PM / IP Logged

Recently installed a mono amp this is my first experience with a mono only amp. Would it help having a mono input feeding it? The crossover I'm using is a H/K CXO-1. Has 6 sets of outputs but 5 are live, can't get the mono out to work, my head doesn't have the 3rd out so whadoido? Can I split the head out to make a third, will the c/o then feed the mono out?

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: January 25, 2004 at 5:15 PM / IP Logged

A mono input feeding your mono amp wouldnt help if performance wise. I think you would get a better signal to your amp if you fed it a stereo input. If your crossover has a full range output just use that and use the amps crossover instead of your crossovers crossover. It should work fine.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mono amp/mono input? Harman/Kardon C/O

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.