starter kill relay

Home / the12volt's Install Bay / General Discussion / starter kill relay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

derrickg

Copper - Posts: 119

Joined: January 27, 2004

Location: Illinois, United States

Posted: January 27, 2004 at 10:23 PM / IP Logged

how do i hook up a starter kill relay so that when someone rips the alarm box out the car still wont start

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: January 28, 2004 at 12:04 AM / IP Logged

The only way you can do that is hook up a relay by itself. You can hook up a hidden toggle swtich that splits your starter while until it's turned on.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: January 28, 2004 at 4:51 PM / IP Logged

derrickg wrote:

how do i hook up a starter kill relay so that when someone rips the alarm box out the car still wont start

Normally Open (N.O.) relay circuit.

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 28, 2004 at 5:02 PM / IP Logged

like teken said is correct but you may want some backup in case the relay or alarm controling it fails because you will be stranded!

Search for other posts by mobiletoys2002

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: January 28, 2004 at 5:16 PM / IP Logged

mobiletoys2002 wrote:

like teken said is correct but you may want some backup in case the relay or alarm controling it fails because you will be stranded!

Shhhhhhhhh . . . You werent suppose to tell him that ! starter kill relay - Last Post -- posted image.

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: January 29, 2004 at 10:56 AM / IP Logged

My bad Teken!

Julian59

Member - Posts: 24

Joined: January 31, 2004

Location: United States

Posted: February 02, 2004 at 2:09 AM / IP Logged

derrickg

Install a latched relay to your starter or ignition kill via channel 2 or 3 of your alarm. When you disarm your alarm your vehicle will not turnover or start untill you activate the latched relay (pressing channel 2or3 or your remote) Let;s say someone rips out the Alarm brain , if they find any kind of switch they might try to start your velicle but if you wire it up so even the latched relay is hidden they won't be able to start the vehicle (no switches to activate), I hope this helps.

Julian59

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: February 02, 2004 at 10:51 PM / IP Logged

Another neat trick is to use the brake switch to control the coil of a relay. Take the wire that has 12 volts when the brake is pressed and run it to pin 85 of a relay. Ground pin 86. Take your starter wire and cut it. Put the switch side on 87 and the starter side on 30. Hide the relay away and if someone rips your alarm out and steals everything in your car thats all they will get. Your car will be safe and sound. You must step on the brake in order to start your car. Most people dont step on the brake until they have it running and are ready to take it out of gear. Just another neat relay trick.

Brian

owner/installer

Sight & Sound Car Stereo

"all electronic equipment runs off of smoke, once you let it out, it stops working"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

starter kill relay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.