the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 BMW Z3 Alarm wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
ryan_r_r 
Member - Posts: 2
Member spacespace
Joined: August 18, 2002
Posted: August 18, 2002 at 6:08 PM / IP Logged  
I am looking for a wiring diagram or colors for a 99 Z3.  Anyone?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: August 19, 2002 at 5:26 AM / IP Logged  

|              12V|red                 |+  |ignition harness            |

|          STARTER|BLACK / YELLOW        |+  |ignition harness            |
|         IGNITION|green               |+  |ignition harness            |
|  SECOND IGNITION|purple              |+  |ignition harness        
|       POWER LOCK|lt. GREEN / WHITE     |+  |factory alarm plug*1        |
|     POWER UNLOCK|blue/red            |+  |factory alarm plug*1        |
| PARKING LIGHTS +|gry/ppl, gray / YELLOW|   |at light switch             |
| PARKING LIGHTS -|blue/green (hazards)|   |factory alarm plug*1        |
|     DOOR TRIGGER|brn/gry, BROWN / blue |-  |factory alarm plug*1        |
|  TRUNK/HATCH PIN|BROWN / white         |-  |factory alarm plug*1        |
|         HOOD PIN|PURPLE / green        |-  |*2                          |
|       TACHOMETER|black               |   |*3                          |
|       BRAKE WIRE|blue/red            |+  |brake switch *4             |

Notes:

NOTE:  This vehicle is equiped with the EWS II immobilizer system that need to be bypassed when adding a remote start.  See direct fax document #1060 for wiring diagram.  *1 12-pin, black factory alarm plug located behind glove box.  *2 Single pin plug next to the factory alarm plug.  *3 The wire is at the diagnostic plug in the passenger side rear of the engine compartment or can also find it behind the instrument cluster.  Do not unplug the instrument cluster with the ignition on or turn the ignition on with the plug disconnected.  *4 Brake wire will only meter with the ignition on.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer